This is the rack that we developed for our Randonneur frames. It may also be used on other bikes without eyelets on the fork blades with the, included, P-clamps. The weight is 212gm. These are tubular stainless steel just like out other racks and have eyelets for lights and a fender mount. The tang at the rear of the rack is undrilled. This ensures that you can mount the rack so it's perfectly level (nothing spoils the lines of a bike like racks that slope). Ideally, the tang is attached to the fender boss under the fork crown (or you may use a fork crown daruma, see fender parts) The tang may also be bent up and attached to the brake bolt. This rack does not mount to low-rider bosses or canti studs. It requires eyelets on the fork blades or p-clamps. If you are having a frame built, please tell your builder that the eyelets should be about 3.75" below the bottom of the fork crown, but it's best to give the builder the rack beforehand. Of course the eyelets are a no-cost option on our semi-custom frames. RFR$110.00 All images and text copyright Velo Orange, LLC 2006, 2007, 2008.